Septin-coated microtubules promote maturation of multivesicular bodies by inhibiting their motility.

The microtubule cytoskeleton consists of microtubule subsets with distinct compositions of microtubule-associated proteins, which instruct the position and traffic of subcellular organelles. In the endocytic pathway, these microtubule-associated cues are poorly understood. Here, we report that in MDCK cells, endosomes with multivesicular body (MVB) and late endosome (LE) markers localize preferentially to microtubules coated with septin GTPases. Compared with early endosomes, CD63-containing MVBs/LEs are largely immotile on septin-coated microtubules. In vitro reconstitution assays revealed that the motility of isolated GFP-CD63 endosomes is directly inhibited by microtubule-associated septins. Quantification of CD63-positive endosomes containing the early endosome antigen (EEA1), the Rab7 effector and dynein adaptor RILP or Rab27a, showed that intermediary EEA1- and RILP-positive GFP-CD63 preferentially associate with septin-coated microtubules. Septin knockdown enhanced GFP-CD63 motility and decreased the percentage of CD63-positive MVBs/LEs with lysobiphosphatidic acid without impacting the fraction of EEA1-positive CD63. These results suggest that MVB maturation involves immobilization on septin-coated microtubules, which may facilitate multivesiculation and/or organelle-organelle contacts.

Trajectories and tipping points of piñon-juniper woodlands after fire and thinning.

Piñon-juniper (PJ) woodlands are a dominant community type across the Intermountain West, comprising over a million acres and experiencing critical effects from increasing wildfire. Large PJ mortality and regeneration failure after catastrophic wildfire have elevated concerns about the long-term viability of PJ woodlands. Thinning is increasingly used to safeguard forests from fire and in an attempt to increase climate resilience. We have only a limited understanding of how fire and thinning will affect the structure and function of PJ ecosystems. Here, we examined vegetation structure, microclimate conditions, and PJ regeneration dynamics following ~20 years post-fire and thinning treatments. We found that burned areas had undergone a state shift that did not show signs of returning to their previous state. This shift was characterized by (1) distinct plant community composition dominated by grasses; (2) a lack of PJ recruitment; (3) a decrease in the sizes of interspaces in between plants; (4) lower abundance of late successional biological soil crusts; (5) lower mean and minimum daily soil moisture values; (6) lower minimum daily vapor pressure deficit; and (7) higher photosynthetically active radiation. Thinning created distinct plant communities and served as an intermediate between intact and burned communities. More intensive thinning decreased PJ recruitment and late successional biocrust cover. Our results indicate that fire has the potential to create drier and more stressful microsite conditions, and that, in the absence of active management following fire, there may be shifts to persistent ecological states dominated by grasses. Additionally, more intensive thinning had a larger impact on community structure and recruitment than less intensive thinning, suggesting that careful consideration of goals could help avoid unintended consequences. While our results indicate the vulnerability of PJ ecosystems to fire, they also highlight management actions that could be adapted to create conditions that promote PJ re-establishment.

Qualitatively Different Delay-Dependent Working Memory Distortions in People With Schizophrenia and Healthy Control Participants.

BACKGROUND: Impairments in working memory (WM) have been well documented in people with schizophrenia (PSZ). However, these quantitative WM impairments can often be explained by nonspecific factors, such as impaired goal maintenance. Here, we used a spatial orientation delayed response task to explore a qualitative difference in WM dynamics between PSZ and healthy control participants (HCs). More specifically, we took advantage of the discovery that WM representations may drift either toward or away from previous trial targets (serial dependence). We tested the hypothesis that WM representations would drift toward the previous trial target in HCs but away from the previous trial target in PSZ. METHODS: We assessed serial dependence in PSZ (n = 31) and HCs (n = 25) using orientation as the to-be-remembered feature and memory delays lasting from 0 to 8 seconds. Participants were asked to remember the orientation of a teardrop-shaped object and reproduce the orientation after a delay period of varying length. RESULTS: Consistent with prior studies, we found that current trial memory representations were less precise in PSZ than in HCs. We also found that WM for the current trial orientation drifted toward the previous trial orientation in HCs (representational attraction) but drifted away from the previous trial orientation in PSZ (representational repulsion). CONCLUSIONS: These results demonstrate a qualitative difference in WM dynamics between PSZ and HCs that cannot be easily explained by nuisance factors such as reduced effort. Most computational neuroscience models also fail to explain these results because they maintain information solely by means of sustained neural firing, which does not extend across trials. The results suggest a fundamental difference between PSZ and HCs in longer-term memory mechanisms that persist across trials, such as short-term potentiation and neuronal adaptation.

Sustained attention deficits in schizophrenia: Effect of memory load on the Identical Pairs Continuous Performance Test.

Background: Sustained attention and vigilance impairments are well documented in people with schizophrenia (PSZ). The processes implicated in this impairment remain unclear. Here we investigated whether vigilance performance varied as a function of working memory load, and also examined the role of attentional lapsing that might arise from a loss of task set resulting in mind wandering. Method: We examined Continuous Performance Test Identical Pairs (CPT-IP) data from a cumulative sample of 247 (PSZ) and 238 healthy control (HC) participants collected over a series of studies. Results: PSZ performed more poorly that HC across conditions with signal/noise discrimination (d') decreasing with increasing working memory load across both groups However, there was a significant interaction of group and load suggesting that performance of PSZ was more negatively impacted by increasing load. We also found that PSZ has a significantly higher rate of attention lapsing than did HC. Discussion: Our results suggest that difficulties maintaining task set and working memory limitations are implicated in the impairments observed on the Identical Pairs CPT. Difficulties with task set maintenance appear to explain the majority of between-group variance, with a more subtle impact of increasing working memory load.

Determination of electric and thermoelectric properties of molecular junctions by AFM in peak force tapping mode.

Molecular thin films, such as self-assembled monolayers (SAMs), offer the possibility of translating the optimised thermophysical and electrical properties of high-Seebeck-coefficient single molecules to scalable device architectures. However, for many scanning probe-based approaches attempting to characterise such SAMs, there remains a significant challenge in recovering single-molecule equivalent values from large-area films due to the intrinsic uncertainty of the probe-sample contact area coupled with film damage caused by contact forces. Here we report a new reproducible non-destructive method for probing the electrical and thermoelectric (TE) properties of small assemblies (10-103) of thiol-terminated molecules arranged within a SAM on a gold surface, and demonstrate the successful and reproducible measurements of the equivalent single-molecule electrical conductivity and Seebeck values. We have used a modified thermal-electric force microscopy approach, which integrates the conductive-probe atomic force microscope, a sample positioned on a temperature-controlled heater, and a probe-sample peak-force feedback that interactively limits the normal force across the molecular junctions. The experimental results are interpreted by density functional theory calculations allowing quantification the electrical quantum transport properties of both single molecules and small clusters of molecules. Significantly, this approach effectively eliminates lateral forces between probe and sample, minimising disruption to the SAM while enabling simultaneous mapping of the SAMs nanomechanical properties, as well as electrical and/or TE response, thereby allowing correlation of the film properties.

Quantum Interference and Contact Effects in the Thermoelectric Performance of Anthracene-Based Molecules.

We report on the single-molecule electronic and thermoelectric properties of strategically chosen anthracene-based molecules with anchor groups capable of binding to noble metal substrates, such as gold and platinum. Specifically, we study the effect of different anchor groups, as well as quantum interference, on the electric conductance and the thermopower of gold/single-molecule/gold junctions and generally find good agreement between theory and experiments. All molecular junctions display transport characteristics consistent with coherent transport and a Fermi alignment approximately in the middle of the highest occupied molecular orbital/lowest unoccupied molecular orbital gap. Single-molecule results are in agreement with previously reported thin-film data, further supporting the notion that molecular design considerations may be translated from the single- to many-molecule devices. For combinations of anchor groups where one binds significantly more strongly to the electrodes than the other, the stronger anchor group appears to dominate the thermoelectric behavior of the molecular junction. For other combinations, the choice of electrode material can determine the sign and magnitude of the thermopower. This finding has important implications for the design of thermoelectric generator devices, where both n- and p-type conductors are required for thermoelectric current generation.

Qualitatively different delay-dependent working memory distortions in people with schizophrenia and healthy control subjects.

Background: Impairments in working memory(WM) have been well-documented in people with schizophrenia(PSZ). However, these quantitative WM impairments can often be explained by nonspecific factors, such as impaired goal maintenance. Here, we used a spatial orientation delayed-response task to explore a qualitative difference in WM dynamics between PSZ and healthy control subjects(HCS). Specifically, we took advantage of the discovery that WM representations may drift either toward or away from previous-trial targets(serial dependence). We tested the hypothesis that WM representations drift toward the previous-trial target in HCS but away from the previous-trial target in PSZ. Methods: We assessed serial dependence in PSZ(N=31) and HCS(N=25), using orientation as the to-be-remembered feature and memory delays from 0 to 8s. Participants were asked to remember the orientation of a teardrop-shaped object and reproduce the orientation after a varying delay period. Results: Consistent with prior studies, we found that current-trial memory representations were less precise in PSZ than in HCS. We also found that WM for the current-trial orientation drifted toward the previous-trial orientation in HCS(representational attraction) but drifted away from the previous-trial orientation in PSZ(representational repulsion). Conclusions: These results demonstrate a qualitative difference in WM dynamics between PSZ and HCS that cannot easily be explained by nuisance factors such as reduced effort. Most computational neuroscience models also fail to explain these results, because they maintain information solely by means of sustained neural firing, which does not extend across trials. The results suggest a fundamental difference between PSZ and HCS in longer-term memory mechanisms that persist across trials, such as short-term potentiation and neuronal adaptation.

Planar aromatic anchors control the electrical conductance of gold|molecule|graphene junctions.

The synthesis of a family of alkanethiol molecules with planar aromatic head groups, designed to anchor molecules effectively to graphene electrodes, is reported. Characterisation of self-assembled monolayers of these molecules on a gold surface via conductive atomic force microscopy shows that when an aromatic head group is present, the conductance G graphene obtained using a graphene coated probe is higher than the conductance G Pt obtained using a platinum (Pt) probe. For Pt probe and graphene probe junctions, the tunnelling decay constant of benzyl ether derivatives with an alkanethiol molecular backbone is determined as ß = 5.6 nm-1 and 3.5 nm-1, respectively. The conductance ratio G graphene/G Pt increases as the number of rings present in the aromatic head unit, n, increases. However, as the number of rings increases, the conductance path length increases because the planar head groups lie at an angle to the plane of the electrodes. This means that overall conductance decreases as n increases. Density functional theory-based charge transport calculations support these experimental findings. This study confirms that planar aromatic head groups can function as effective anchoring units for graphene electrodes in large area molecular junctions. However, the results also indicate that the size and geometry of these head groups must be considered in order to produce effective molecular designs.

Testicular heat stress, a historical perspective and two postulates for why male germ cells are heat sensitive.

Herein, we compare the different experimental regimes used to induce testicular heat stress and summarise their impact on sperm production and male fertility. Irrespective of the protocol used, scrotal heat stress causes loss of sperm production. This is first seen 1-2 weeks post heat stress, peaking 4-5 weeks thereafter. The higher the temperature, or the longer the duration of heat, the more pronounced germ cell loss becomes, within extreme cases this leads to azoospermia. The second, and often underappreciated impact of testicular hyperthermia is the production of poor-quality spermatozoa. Typically, those cells that survive hyperthermia develop into morphologically abnormal and poorly motile spermatozoa. While both apoptotic and non-apoptotic pathways are known to contribute to hyperthermic germ cell loss, the mechanisms leading to formation of poor-quality sperm remain unclear. Mechanistically, it is unlikely that testicular hyperthermia affects messenger RNA (mRNA) abundance, as a comparison of four different mammalian studies shows no consistent single gene changes. Using available evidence, we propose two novel models to explain how testicular hyperthermia impairs sperm formation. Our first model suggests aberrant alternative splicing, while the second model proposes a loss of RNA repression. Importantly, neither model requires consistent changes in RNA species.

Stakeholder engagement in the development of genetically modified mosquitoes for malaria control in West Africa: lessons learned from 10 years of Target Malaria's work in Mali.

From 2012 to 2023, the Malaria Research and Training Center (MRTC), based out of the University of Sciences, Techniques and Technologies of Bamako (USTTB), was part of the Target Malaria research consortium working towards developing novel gene drive-based tools for controlling populations of malaria vector mosquitoes. As part of this work, Target Malaria Mali has undertaken a range of in-depth engagement activities with the communities where their research is conducted and with other stakeholders nationally. These activities were meant to ensure that the project's activities took place with the agreement of those communities, and that those communities were able to play a role in shaping the project's approach to ensure that its eventual outcomes were in line with their needs and concerns. This paper aims to conduct a critical assessment of those 10 years of stakeholder engagement in order to identify good practices which can inform future engagement work on gene drive research in West Africa. It sets out a range of approaches and practices that enabled the Target Malaria Mali team to engage a variety of stakeholders, to share information, collect feedback, and determine community agreement, in a manner that was inclusive, effective, and culturally appropriate. These can be useful tools for those working on gene drive research and other area-wide vector control methods in West African contexts to ensure that their research is aligned with the interests of the communities who are intended to be its ultimate beneficiaries, and to allow those communities to play a meaningful role in the research process.

Splitting the anterior mitral leaflet impairs left ventricular function in an ovine model.

OBJECTIVES: During mitral valve replacement, the anterior mitral leaflet is usually resected or modified. Anterior leaflet splitting seems the least disruptive modification. Reattachment of the modified leaflet to the annulus reduces the annulopapillary distance. The goal of this study was to quantify the acute effects on left ventricular function of splitting the anterior mitral leaflet and shortening the annulopapillary distance. METHODS: In 6 adult sheep, a wire was placed around the anterior leaflet and exteriorized through the left ventricular wall to enable splitting the leaflet in the beating heart. Releasable snares to reduce annulopapillary distance were likewise positioned and exteriorized. A mechanical mitral prosthesis was inserted to prevent mitral incompetence during external manipulations of the native valve. Instantaneous changes in left ventricular function were recorded before and after shortening the annulopapillary distance, then before and after splitting the anterior leaflet. RESULTS: After splitting the anterior leaflet, preload recruitable stroke work, stroke work, stroke volume, cardiac output, left ventricular end systolic pressure and mean pressure were significantly decreased by 26%, 23%, 12%, 9%, 15% and 11%, respectively. Shortening the annulopapillary distance was associated with significant decreases in the end systolic pressure volume relationship, preload recruitable stroke work, stroke work and left ventricular end systolic pressure by 67%, 33%, 15% and 13%, respectively. Shortening the annulopapillary distance after splitting the leaflet had no significant effect. CONCLUSIONS: Splitting the anterior mitral leaflet acutely impaired left ventricular contractility and haemodynamics in an ovine model. Shortening the annulopapillary distance after leaflet splitting did not further impair left ventricular function.

Using intrinsic properties of quantum dots to provide additional security when uniquely identifying devices.

Unique identification of optical devices is important for anti-counterfeiting. Physical unclonable functions (PUFs), which use random physical characteristics for authentication, are advantageous over existing optical solutions, such as holograms, due to the inherent asymmetry in their fabrication and reproduction complexity. However, whilst unique, PUFs are potentially vulnerable to replication and simulation. Here we introduce an additional benefit of a small modification to an established model of nanoparticle PUFs by using a second measurement parameter to verify their authenticity. A randomly deposited array of quantum dots is encapsulated in a transparent polymer, forming a tag. Photoluminescence is measured as a function of excitation power to assess uniqueness as well as the intrinsic nonlinear response of the quantum material. This captures a fingerprint, which is non-trivial to clone or simulate. To demonstrate this concept practically, we show that these tags can be read using an unmodified smartphone, with its built-in flash for excitation. This development over constellation-style optical PUFs paves the way for more secure, facile authentication of devices without requiring complex fabrication or characterisation techniques.

Seasonal variation in bull semen quality demonstrates there are heat-sensitive and heat-tolerant bulls.

Using semen data from 1271 ejaculates (79 different bulls, 11 different breeds) we have investigated the variability of semen quality in cattle living in sub-tropical conditions. Modelling shows definitive evidence of seasonal variation. Semen quality from the same bulls had a 90% "pass rate" for cryopreservation purposes in winter, dropping to less than 50% in summer. Notably, individual bulls could be classified as either "heat-tolerant" (produce good quality spermatozoa all year regardless of temperature) or "heat-sensitive" (only produce good quality sperm in summer). Nominal logistic regression demonstrated when temperatures reach 30.5 °C, 40% of heat-sensitive bulls fail a semen analysis 17 days later. At 34 °C, the proportion of bulls failing reached 63%. Ratifying this, the purposeful heating of bulls to 40 °C for 12 h showed that individual animals had different degrees of heat-sensitivity. Using historical temperature data, we then modelled how many days/decade bulls would be subject to heat-events. Beginning from 1939 to 1949, on average, the area in which bulls were kept recorded 19, 7 and 1 day over 38 °C, 39 °C and 40 °C respectively. This number steadily increases and of last decade (2010-2010), the numbers of days per decade over 38 °C, 39 °C and 40 °C jumped to a staggering 75, 39 and 15 respectively. These data show the urgent need to identify heat-tolerant bulls as future sires. Such variation likely explains why the veterinary bull breeding test often fails to accurately predict bull breeding potential.

Assembly, structure and thermoelectric properties of 1,1'-dialkynylferrocene 'hinges'.

Dialkynylferrocenes exhibit attractive electronic and rotational features that make them ideal candidates for use in molecular electronic applications. However previous works have primarily focussed on single-molecule studies, with limited opportunities to translate these features into devices. In this report, we utilise a variety of techniques to examine both the geometric and electronic structure of a range of 1,1'-dialkynylferrocene molecules, as either single-molecules, or as self-assembled monolayers. Previous single molecule studies have shown that similar molecules can adopt an 'open' conformation. However, in this work, DFT calculations, STM-BJ experiments and AFM imaging reveal that these molecules prefer to occupy a 'hairpin' conformation, where both alkynes point towards the metal surface. Interestingly we find that only one of the terminal anchor groups binds to the surface, though both the presence and nature of the second alkyne affect the thermoelectric properties of these systems. First, the secondary alkyne acts to affect the position of the frontier molecular orbitals, leading to increases in the Seebeck coefficient. Secondly, theoretical calculations suggested that rotating the secondary alkyne away from the surface acts to modulate thermoelectric properties. This work represents the first of its kind to examine the assembly of dialkynylferrocenes, providing valuable information about both their structure and electronic properties, as well as unveiling new ways in which both of these properties can be controlled.

Ethical aspects of GMO regulation in the EU: Regulating new plant breeding techniques as GM has negative effects on sustainability, diversity and inclusion: Regulating new plant breeding techniques as GM has negative effects on sustainability, diversity and inclusion.

Plant breeding plays a crucial role for the EU to live up to its values and promises of sustainability, innovation and diversity and inclusion. The current regulations, however, make it de facto impossible to use new breeding technologies.

Domesticating cleaner cookstoves for improved respiratory health: Using approaches from the sanitation sector to explore the adoption and sustained use of improved cooking technologies in Nepal.

Drawing on village-based data from Nepal, this paper explores the transferability of the Integrated Behavioural Model for Water, Sanitation and Hygiene (IBM-WASH) to the clean cooking sector and its potential to elucidate how barriers to improved cookstove adoption and sustained use intersect at different scales. The paper also explores the potential of IBM-WASH, behaviour settings theory and domestication analysis to collectively inform effective behaviour change techniques and interventions that promote both adoption and sustained use of health-promoting technologies. Information on cookstove use in the community since 2012 enables valuable insights to be gained on how kitchen settings and associated cooking behaviour were re-configured as homes and stoves were re-built following the April 2015 earthquake. The methodological approach comprised of semi-structured interviews, focus group discussions, direct observation and household surveys. The findings indicated that the IBM-WASH framework translated well to the improved cookstove sector, capturing key influences on clean cooking transitions across the model's three dimensions (context, psychosocial and technology) at all five levels. Understandings gained from utilising IBM-WASH were enhanced - especially at the individual and habitual levels - by domestication analysis and settings theory which elucidated how different cooking technologies were incorporated (or not) within physical structures, everyday lives and routine behaviour. The paper concludes that this combination of approaches has potential applicability for initiatives seeking to promote improved environmental health at community-wide scales.

Multi-component self-assembled molecular-electronic films: towards new high-performance thermoelectric systems.

The thermoelectric properties of parallel arrays of organic molecules on a surface offer the potential for large-area, flexible, solution processed, energy harvesting thin-films, whose room-temperature transport properties are controlled by quantum interference (QI). Recently, it has been demonstrated that constructive QI (CQI) can be translated from single molecules to self-assembled monolayers (SAMs), boosting both electrical conductivities and Seebeck coefficients. However, these CQI-enhanced systems are limited by rigid coupling of the component molecules to metallic electrodes, preventing the introduction of additional layers which would be advantageous for their further development. These rigid couplings also limit our ability to suppress the transport of phonons through these systems, which could act to boost their thermoelectric output, without comprising on their impressive electronic features. Here, through a combined experimental and theoretical study, we show that cross-plane thermoelectricity in SAMs can be enhanced by incorporating extra molecular layers. We utilize a bottom-up approach to assemble multi-component thin-films that combine a rigid, highly conductive 'sticky'-linker, formed from alkynyl-functionalised anthracenes, and a 'slippery'-linker consisting of a functionalized metalloporphyrin. Starting from an anthracene-based SAM, we demonstrate that subsequent addition of either a porphyrin layer or a graphene layer increases the Seebeck coefficient, and addition of both porphyrin and graphene leads to a further boost in their Seebeck coefficients. This demonstration of Seebeck-enhanced multi-component SAMs is the first of its kind and presents a new strategy towards the design of thin-film thermoelectric materials.

Analogue Mean Systemic Filling Pressure: a New Volume Management Approach During Percutaneous Left Ventricular Assist Device Therapy.

The absence of an accepted gold standard to estimate volume status is an obstacle for optimal management of left ventricular assist devices (LVADs). The applicability of the analogue mean systemic filling pressure (Pmsa) as a surrogate of the mean circulatory pressure to estimate volume status for patients with LVADs has not been investigated. Variability of flows generated by the Impella CP, a temporary LVAD, should have no physiological impact on fluid status. This translational interventional ovine study demonstrated that Pmsa did not change with variable circulatory flows induced by a continuous flow LVAD (the average dynamic increase in Pmsa of 0.20 ± 0.95 mmHg from zero to maximal Impella flow was not significant (p = 0.68)), confirming applicability of the human Pmsa equation for an ovine LVAD model. The study opens new directions for future translational and human investigations of fluid management using Pmsa for patients with temporary LVADs.